| Specifications | | Rear Panel | Larger Image
The Icom IC-7800 is clearly one the most advanced amateur radio ever developed. It utilizes four separate 32-bit floating point DSP chips, has a 7-inch wide TFT display, built in RTTY/PSK31 receive and transmit plus compact flash technology. As impressive as the features are; it is performance that sets this radio apart. By sparing no expense an incredible +40dBm intercept point has been achieved with ultra wide dynamic range. And you enjoy this incredible performance in two fully independent receiver circuits controlled on the left side of the radio. There is even a separate preamp and mixer for the 6 meter band. The rear panel features four primary antenna inputs [SO-239] plus provisions for receive antenna A and B. And nothing is sacrificed on the transmit side. The newly designed push-pull MOSFET amplifiers work with a 48 VDC, providing a powerful 200 watts of output at full duty cycle with low IMD in all bands. A 120 VAC switching power supply is built-in. The supplied accessories include: rack mounting ears, compact flash [64 Mb] and various plugs (mic not supplied).
This radio covers the HF ham bands plus 6 meters (receive from 30 kHz - 60 MHz). The high resolution 7 inch TFT color LCD display provides more operating information than you've ever had before, including a spectrum scope. And Icom really stands behind this radio with a limited two year factory warranty.
Important Upgrade Note: Icom has produced an important upgrade for the IC-7800. They have added a 3 kHz roofing filter. Ver. 2.0 is displayed at the lower right corner of the display when the radio is first switched on during the boot up sequence if it has the 3kHz roofing upgrade.
The IC-7800 is double boxed from Icom. But Universal goes one step further. We have purchased a very large box that goes around the Icom box immersing the radio in yet another layer of foamies. Extra protection for your investment. Shipping varies by location. All screen shots are simulated pictures.